The Ensemble training aims at the correct and comprehensive learning of the
song duration and notes. The keynote will be shielded for ensemble. The
luminous keyboard will light on according to the main melody notes,
indicating the note to be played, and you can perform by following the
guidance of the lighted key. You need to play the correct note according to the
correct duration of the song. If you fail to play within 3 seconds, the keyboard
will automatically play the keynote, and the keyboard zone in the screen will
display the correct note and tempo.
After one song is finished, repeat the current song to be learned.
Press [START/STOP] or press [ENSEMBLE] to disenable the training
function.
Assembly Instruction of Keyboard Stand
ATTENTION:ADULTASSEMBLY REQUIRED
HTYPE STAND
Find out the parts (D) and (E), align the
holes on the base of the part (D) with the
holes on the part (E). Use nut (I) and bolt
(H) to connect the two parts. Use correct
tools to ensure a firm attachment. Repeat
this process for the other side.
Attach the part (B) to (D) and(C) using
the appropriate screw(F).Repeat this
process for the other side.
Fasten screws (F) for adjusting the
suitable height of the keyboard
stand.
Attach two parts (B) to the part (A)
using four screws (F) to create the
upper part assembly. Fasten screws(G)
for fixing the keyboard on stand.