VIII. Recording and Rhythm Programming
● Recording
Press [REC] to enable the recording function, "REC" will show on the
display. Under this mode all playing notes will be recorded. When the storage
is full, "REC" will flash on the display, and recording will stop automatically.
Press [PLAY] to playback the recorded notes, and "PLAY" will show on
◆
the display. On completion of playback, it will enter to the recording mode
and "REC will show on the display.
You can record a new note, or you can press [PLAY] to playback the recorded
note.
Press [Start/Stop] or press [REC] again to disenable the recording
◆
function, and all recorded rhythm will be removed.
● Rhythm programming
Press (PROG] to enable the rhythm programming function, "PRG" will show
on the display, and the keyboard percussion will be activated. Under this
mode, you can create custom rhythms by playing the corresponding
percussion key.
32 percussions can be recorded at maximum, after that PRG" will flash on
◆
the display, and programming will slop automatically.
Press [PLAY] to playback the programming rhythm. Press [PLAY] again
◆
to stop playback, "PRG" will show on the display and programming function
will be enabled. You can re-program rhythms or you can press [PLAY] again
to playback.
Press [START/STOP] or press [PROG] again to disenable the
◆
programming function, and all recorded rhythm will be removed.
IX. Three-step Smart Teaching With Illuminated Keys
● Trainingl: One Key
Press [ONE KEY] to enable the One Key training function, "LEARN",
"SONG" and the song number will show on the display, and then press
"+"/"-" button to select the song to be learned.
The luminous keyboard will light on according to the main melody notes,
indicating the note to be played, and you can perform by following the
guidance of the lighted key.
Single Key training aims at duration learning, and there is no requirement for
pitch or correctness. This mode allows mistakes when playing the keys, but
the keyboards still plays correct notes, and the luminous keys will light on
according to the correct notes while the key zone in the display will also
show the correct notes.
After one song is finished, repeat the current song to be learned.
Press [Start/Stop] or press [ONE KEY] to disenable the training function.
● Training lI: Follow
Press [FOLLOW] to enable the follow function, "LEARN", "SONG" and the
song number wil show on the display, and then press "+"/"-" button to select
the song to be learned.
With [FOLLOW] function, you can learn by following the correctly playing
notes. You can play according to the demonstration song. the key will light on
according to the melody notes, indicating the notes to be played, and you can
play correctly by following the guidance. You can also learn how to play by
following the indicators in the key zone of the display. It will wait for you to
play the correct note before it moves to the next one.
※ Notes: Under this state, the Keyboard plays only the correct notes, and
gives no response to the wrong notes.
Press STARTISTOP] or press [FOLLOW] to disenable the training function.
● Training III: Ensemble
Press [ENSEMBLE] to enable the Ensemble training function, "LEARN",
"SONG" and the song number will show on the display, and then press
"+"/"-" button to select the song to be learned.