Dremel 1200 Manuel D'instructions Et De Sécurité page 3

DM 2610933927 11-05.qxd
Glue stick
Tip
Headlight
Pop-Up
Stand
With switch in the "Off" position, plug
Dremel Dual Temp Glue Gun Model 1200
into a standard 120V receptacle.
Adjust switch to low setting or high setting.
Red light will be activated to indicate
power to the unit. Insert the appropriate
glue stick into the rear opening of the glue
gun.
4/12/06 4:20 PM Page 3
Getting to Know Your Glue Gun
On/Off
Switch
Trigger
Operation
Allow glue gun to reach selected tempera-
ture.
selected temperature is reached. NOTE:
As the glue gun is used, the red light will
again illuminate until the glue gun cycles
back to maximum temperature.
3
Indicator
Lights
Stand
release button
Green light will illuminate when