Publicité
Les langues disponibles
Les langues disponibles
FEATURES AND SHELVING CONFIGURATIONS
Lock and Key
The lock and key allow you to lock and store contents.
Content Temperature versus Air Temperature
Air temperature moves up and down with door openings
and compressor run and off cycles. Air has little thermal
mass and therefore changes temperature relatively quickly
between on/off cycles. Stored contents have much higher
thermal mass so their temperatures change much slower.
Always measure temperature with a mass weighted sensor
to determine if the contents being stored are at the proper
temperature.
Probe Port
The probe port is a hole from the inside to the outside of
the unit, which is located on the back of the unit. (See
Figure 12). Remove the foil label and foam plug(s) from
the hole in the back of the unit, insert your probe or wires
through the hole in the back of the unit. Seal hole with foam
plug(s).
-Foam plug(s)
Foil label,
remove to
access probe
port hole.
Bottle Holder
For your convenience a bracket has been provided to
hold your in-house temperature monitoring bottle. On the
MS24FA it is located on the right side of the interior liner
toward the front.
Figure 12
10
Loading Tips and Suggestions
Your appliance is equipped with 3 adjustable shelves for
flexibility of content storage. The shelves can move up or
down to accommodate various content sizes.
Freezer:
24" (61 cm) Wide Models:
Shown with a solid door. Figure 13.
(3) full depth perforated
metal shelf.
Bottle holder
Figure 13
Figure 14
Perforated metal shelf
Figure 15
Publicité
