SPORTSTECH X100-C Manuel page 34

8. CONSOLE OPERATION MANUAL
Value
SCAN
Switches between the different modes and shows the value for a few seconds.
TIME
Displays the total length of the current workout.
Display range 00:00 ~ 99:59 min
SPEED Displays the current pedal speed.
Display range 0.0 ~ 99.9 km/h
DISTANCE
Displays the total distance of the current workout.
Display range 0.00 ~ 999.9 km
CALORIE
Displays the total estimated calorie burn for the current workout.
Display range 0 ~ 9999 kcal
ODO.
Displays the total distance.
PULSE Measures and displays heartrate during the current workout when hands are resting on
the handlebar sensors.
Display range 40 ~ 240 bpm
DIST. CAL.
TIME
SCAN SPEED ODO. PULSE
Set Set Mode Mode
Operation of the display:
Press the MODE button to activate the display. By repeatedly
pressing the MODE button, you switch manually between the
various functions. Press and hold the MODE button for three
seconds to reset the memory and clear the training data.
The display will automatically turn off after four minutes of
inactivity.
Battery change:
This monitor requires two "AA" or "AG" 13amp batteries.
You can replace the batteries on the back of the device.
Reset Reset
o q b p b
34
Description