Olympia NC 510 Mode D'emploi page 26

3.2. Care and maintenance
Exchange of wearing parts
1. If the transport belts are worn and malfunction, remove the feeder
and press down the contact face to exchange the belts. Restore
original conditions.
2. Worn transport wheels can be exchanged the same way. Remove
the complete feeder unit and restore original conditions after
exchange.
3. Unscrew the fuse holder cap for changing the fuse. Close after
change and tighten again.
Cleaning the NC 510
The NC 510 has to be regularly cleaned of dust and other contamination, which
are partly getting into the unit during operation; they contaminate the sensors
and prevent optimal counting and checking of banknotes. Lift the NC 510 cover
and remove it. Use a soft brush or cloth (included) for cleaning the sensors and
remove the course dust. Use a compressed air spray for currency counters to
remove dust from difficult to access places. This ensures years of correct
functioning of the NC 510.
All manuals and user guides at all-guides.com
OLYMPIA NC 510
- 26 -