Olympia NC 510 Mode D'emploi page 22

Display of suspect notes
The unit stops automatically and sounds a short beep tone if a suspect note is detected. The last banknote in
the stacker is the suspect note. Remove it from the bundle and press "RESET" to restart the counting.
Please note to reduce the amount of counted banknotes by one, because the suspect banknote is
included in the result.
Set Test Criteria
Press and hold "+1" and switch the unit on. The following is displayed:
Counting display
Press "BAT" or "ADD" to toggle between the settings. Increase the displayed value with "UV" and decrease it
with "+1". Press "RESET" to exit the setup menu.
Press and hold "BAT" while switching the unit on to reset to factory settings. "dEF" and "-H-" is displayed. Press
"RESET" to continue working with the unit.
All manuals and user guides at all-guides.com
Batch display
OLYMPIA NC 510
- 22 -
Description
Width setting
UV setting
Test sensitivity setting