Publicité
Les langues disponibles
Les langues disponibles
Using the NXF600W
Wall-Mount Bracket
The NXF600U Bracket must be installed on the NX enclo-
sure to use the NXF600W Wall-Mount Bracket.
Step 1 – Choose a Location
Do not attempt to install the enclosure to the wall alone and always
follow safety rules. Do not mount onto a surface that's not secure!
Step 2 – Mount Wall-Mount Bracket
Step 3 – Angle Stand-Off Rails
Step 4 – Mounting the NX Enclosure
NXF600W with Angle
Stand-Offs Attached
(Installation to the NXF600W Wall-Mount
bracket can be made without the angle stand-
offs, if a downward angled position is not
required.)
Locate the appropriate place where the NX enclosure
will be mounted. Mounting should be to a secure surface
such as wall joists or pillars that can handle the load.
It's best to mount the NXF600W Wall-Mount bracket
to the secure surface prior to attaching the NX enclo-
sure (equipped with the NXF600U bracket). Once the
NXF600W Wall-Mount bracket is secured – to a proper
secure surface – proceed to mount the NX enclosure
(equipped with the NXF600U bracket).
If required, install the Angle Rails to the Wall-Mount
Bracket using the bolts provided.
i. Place the NX Enclosure equipped with the NXF600U
bracket into the Wall-Mount Assembly. Install the bottom
two nuts and bolts first (see diagram). Do not fully tighten
the bolts until the top bolts are in place and the
cabinet has been properly positioned.
ii. Install the top 2 nuts and bolts of the
NXF600U brackets to the NXF600W
Wall-Mount brackets at the appropriate
angle using the Angle Stand-Off Rails if
needed. (see diagram)
Canada
Voice: (905) 837-8481
Fax: (905) 837-8746
Yorkville Sound
550 Granite Court
Pickering, Ontario
L1W-3Y8 CANADA
NXF600W Wall-Mount
Mount the assembly to the bot-
tom first for stability
Using the Stand-Off Rails
helps position the NX
Enclosure at the perfect angle
U.S.A.
Voice: (716) 297-2920
Fax: (716) 297-3689
w w w . y o r k v i l l e . c o m
Yorkville Sound Inc.
4625 Witmer Industrial Estate
Niagara Falls, New York
14305 USA
Publicité
