Publicité
Les langues disponibles
Les langues disponibles
Attaching the NXF600U
Bracket to NX Enclosures
Mount the NXF600U bracket onto the NX enclosure prior
to flying or mounting.
Step 1 – Installing the Bottom
Enclosure Adapter Plate
Remove the enclosure's bottom four stand
adapter bolts. Do not remove the Stand
Adapter and be sure to save the bolts,
they will be needed to mount the bottom
Enclosure Adapter Plate. Position the bot-
tom Enclosure Adapter Plate on the Stand
adapter (as shown in diagram). Use the bolts,
previously used to mount the Stand Adapter,
and mount the bottom Enclosure Adapter Plate
to the enclosure (on top of the Stand Adapter).
Step 2 – Installing the Top
Enclosure Adapter Plate
On the top of the NX enclosure, remove the 2 hex
bolts. Position the top Enclosure Adapter Plate as
shown in diagram, and use two of the bolts provided
with the kit to mount the plate on the enclosure.
Step 3 – Mounting the Enclosure to
the Steel U-Bracket
With the NX enclosure on its side, mount the Steel
U-Bracket as shown in the diagram. Align the holes
on the bracket with the corresponding holes on the
NX enclosure (the top uses a single bolt to mount the
Steel U-Bracket and the bottom uses two). Do not
tighten the bolts until the complete bracket is in place.
Top
Step 4 – Assembly complete
Tighten all bolts mounting the bracket to the NX enclo-
sure appropriately before flying.
Stand Adapter Screws
Bottom
Canada
Voice: (905) 837-8481
Fax: (905) 837-8746
w w w . y o r k v i l l e . c o m
Yorkville Sound
550 Granite Court
Pickering, Ontario
L1W-3Y8 CANADA
Bottom Plate Placement
Top Plate Placement
U.S.A.
Voice: (716) 297-2920
Fax: (716) 297-3689
Yorkville Sound Inc.
4625 Witmer Industrial Estate
Niagara Falls, New York
14305 USA
Publicité
