DeWalt DDF5110500 Traduction De La Notice D'instructions Originale page 46

English
5 Cleaning and Maintenance
WARNING
Serious injuries due to accidental
triggering
Î
Remove the battery.
Î
Remove the gas cartridge.
Î
Remove the nail strip from the
magazine, see chapter 4.2
"Removing the Nail Strip".
Î
Do not press the barrel of the Gas
Nailer against any surfaces.
Î
Keep your ¿ nger away from the
trigger.
CAUTION
Hot surfaces
Î
Let the Gas Nailer cool down prior to
cleaning.
NOTICE Malfunctions: Do not oil device
components or lubricate them with grease.
5.1 Cleaning the Air Filter
Î
Loosen the screw on the cover/lid (1).
Î
Remove the cover/lid (2).
Î
Clean the air ¿ lter in the cover using
compressed air.
1
2
46
All manuals and user guides at all-guides.com
5.2 Cleaning the Surfaces
NOTICE Damage to surfaces: Do not use any
thinners, solvents, gasoline, etc. for cleaning
purposes.
–
–
5.3 Maintaining the Gas Nailer
The Gas Nailer may only be maintained and
repaired by an authorized specialist workshop. If
a maintenance or service measure is required,
the LED on the handgrip will start to À ash, see
chapter 2.4 „LED Device Indicator".
Only clean the Gas Nailer using dry cloths.
Only clean the tool box with dry cloths and
compressed air.