DeWalt DDF5110500 Traduction De La Notice D'instructions Originale page 40

English
2 Unit/Device Overview
2.1 Scope of Delivery
Check the scope of delivery after receipt of
the Gas Nailer. Report damaged parts to your
specialist dealer.
Scope of delivery: Tool case with Gas Nailer,
charger and two batteries.
2.2 Individual Parts and
Designations
1 2
3
15
16 17 18
12
14
13
11
1 Cover (Motor)
2 Cover (Gas
Cartridge)
3 Trigger
4 LED Device
Indicator
5 Battery
6 Hanging Hook
7 Nail Lock
8 Magazine Foot
9 Charger
40
All manuals and user guides at all-guides.com
4
5
6
7
8
9
10
10 Power Cord
11 Adapter
12 Charging Cable
(Battery)
13 Battery
14 Protective Cap
(Battery)
15 Barrel (with Contact
Trigger)
16 Magazine Slot
17 Magazine Slider
18 Magazine
2.3 Sleep Mode
The Gas Nailer is equipped with a „Sleep Mode"
function to protect the battery. If the Gas Nailer
has not been used for a duration longer than
24 hours, it can only be turned back on after the
battery has been removed and re-inserted.
2.4 LED Device Indicator
The LED on the handgrip indicates two different
states:
Red LED State/Status
On Battery has to be charged.
Gas Nailer has to be serviced by
Flashing
a specialist workshop.
2.5 Hanging Hook
The hanging hook is, for example, used to
fasten the device to a belt (when climbing
a ladder or scaffolding, etc.) and can be ¿ tted to
both sides of the Gas Nailer.
To fasten the hanging hook on the opposite
side:
Î
loosen the screws with a hexagon socket.
Î
Use these screws to attach the hanging
hook on the opposite side.