Greencut GTC300XE Manuel D'utilisation page 76

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

76
1
2
3
4
5
1.
Rubber washers M8x20 (x10)
2.
M8x20 (x8) screws
3.
Nut M8 (x8)
4.
Battery (x1)
5.
Screw M5x10 (x2) + nut M5 (x2)
6.
Shift lever (x1)
7.
Battery base protector (x1)
8.
Battery connection cables (x1)
9.
Battery fixation (x1)
10. Spark plug wrench (x1)
11. Mounting Keys 8/10-12/14-13-13/16-17/19
12. Nuts M8 (x8)
13. Nuts M5 (x6)
14. User manual (x1)
Remove the product and accessories from the box. Make sure all items are present.
Inspect the product to ensure that it has not been broken or damaged in transit.
Do not discard the packaging material until you have carefully inspected and satisfactorily used the product.
ATTENTION: If any part is missing or damaged, please contact the Official Technical Service. Do not
use this product without replacing the part. Using this product with damaged or missing parts can
cause serious injury to the operator.
7
6
8
9
10
15
11
16
12
13
17
15. Allen keys nº 4 and 5 (x1)+(x1)
16. Combination screwdriver (x1)
17. Nut m5 (shift lever) (x1)
18. M6x20 (x6) screws
19. M6x16 (x4) screws
20. M6x16 (x2) screws
21. Knife fixing pins 8x50mm (x2)
22. Nylon Clamps (x5)
23. Screws M8x55 (x2)
24. Screw (shift lever) M5x20 (x1)
25. Washers 8x24mm (x6)
26. Washers 6x18mm (x6)
27. Battery mounting screws M6x90 (x2)
14
22
18
23
27
19
24
20
25
21
26

Publicité

Table des Matières
loading

Table des Matières