Publicité
Les langues disponibles
Les langues disponibles
6.2 Rear net bag cleaning
(1) Press and hold the button at the front end of the filter cover to remove the whole filter
cover from the body;
(2) Screw out the rear cover of the filter cover,
(3) Clean the metal filter screen in the filter cover;
(4) Tighten the rear cover of the filter cover, and assemble the filter cover to the body.
1.
2.
3.
Metal filter screen
6.3 battery replacement
Open the back filter, loosen the handle, take out the battery pack, gently press the battery
power cord to separate and replace the battery.
1.
2.
3.
4.
Maintenance and storage
1. The battery discharges itself during storage. Make sure the robot is fully charged before
storage.
2. When not in use, you must recharge the battery at least every three months.
• Unplug the external adapter from the socket and then the charging cable from the external
adapter and the robot.
• Remove the accessories from the robot. If necessary, rinse the robot and accessories with
clean water. Do not use detergent.
• Make sure the robot is drained before storage.
• Use a wet cloth to clean and dry the robot and its accessories.
• Store in a well ventilated place away from sunlight, heat, fire sources, pool chemicals and
children.
• The storage environment temperature should be 10ºC– 25ºC (50ºF– 77 ºF). Note: higher
temperature may shorten battery life.
7
Publicité
