Chauvet DJ CH-06 Manuel De Référence page 2

CH-06 QRG
About This
Guide
Disclaimer
Safety Notes
Contact
What Is
Included
To Begin
Product
Description
Read ALL the Safety Notes in this document before installing, operating, or
maintaining this product. Chauvet may change this QRG at any time.
· Carefully inspect every stand piece, stand component, connecting
hardware, and tripod base before use.
· Assembly of stands should be carried out by trained persons only.
· Be sure to determine what kind of stand is required to carry the loads
required for each job. Refer to the Technical Specifications for weight-
bearing information.
· DO NOT use stands for loads that exceed the maximums provided in
the Technical Specifications on the product sticker or this Quick
Reference Guide.
· DO NOT use stand if any welded joints are cracked or appear
compromised.
· DO NOT use stand if horizontal rungs, T-bar, or diagonals are dented or
damaged.
· ONLY hang on horizontal rungs of stands. Diagonals are not designed
to bear weight.
· DO NOT use stand if the tripod, junctions, connectors, or quick release
pins are bent.
· Ensure that you assemble stand properly using all shown parts.
· DO NOT drag stand over surfaces or other stands. If you cannot carry
the stand properly alone, make sure someone else can help you.
· DO NOT use a stand that has been dropped.
· For better stability, place sandbags by the lower crossbar of the tripod
stand.
CAUTION: Maximum load capacity for the CH-06 is 50 lbs (22 kg)
evenly distributed. DO NOT exceed this number.
· CH-06 & Adaptor
· Connecting Hardware
Unpack your CH-06 and make sure you have received all parts in good
condition. If the box or contents appear damaged, notify the distributor
immediately, not Chauvet.
The CH-06 is a lightweight compact T-bar great for lighting effects in a
tight space. With 8 optional mounting points complete with hardware, the
CH-06 is great for mobile DJs and entertainers.
· Warranty Card
· Quick Reference Guide
2
EN