Publicité
Les langues disponibles
Les langues disponibles
2. Place the PianoLight lamp in the
center of the piano's top cover (as
shown by
a groove on the bottom of the
lamp's base to accommodate the
hinge of the piano's top cover.
3. Hook the L-shaped fastener (as
shown by
Safety Strap onto the back of the
piano (as shown by
and then adjust the hook and loop
fastener to ensure that the Safety
Strap is fully tightened. If the piano
is covered with piano cover cloth,
fold the cloth that falls under the
top cover of the piano back onto the top cover first so the L-shaped fastener hooks onto the
back of the piano, not just onto the cloth.
4. Adjust the position of the lamp head by referring to
you adjust the lamp head so that its rear side is positioned vertically and the distance between
the light emitting surface and the piano keyboard is 70 cm.
5. Connect the power cord of the lamp to the power adapter (as shown by
plug it into a power outlet (as shown by
Upon receiving power from the power outlet, the lamp's warm-up process will start
automatically and will take approximately 5 seconds. Please DO NOT turn off the lamp during
the warm-up process. You can start using the lamp when the process is complete.
Using the Lamp
Turning on/off the Lamp and Entering Auto Dimmer Mode
• Do not block the light sensor on the lamp. Otherwise the Auto
Dimmer Mode will not function properly.
• If the Auto Dimmer Mode is turned on, the lamp will monitor the
ambient lighting condition and dynamically adjust the brightness
setting.
• The Auto Dimmer Mode will exit automatically when you manually
adjust brightness or color temperature.
2
English
in the figure). There is
in the figure) of the
in the figure)
Turning on/off the Lamp
To turn on the lamp, touch the Power
lamp, touch the Power
Entering Auto Dimmer Mode
To enter Auto Dimmer Mode, touch the Auto Dimmer Mode
button when the lamp is on. The Auto Dimmer Mode
light up. The Auto Dimmer Mode automatically adjusts the lamp's
brightness according to the ambient lighting condition.
7 0
7 0
7 0
c m
c m
c m
in the figure. It is recommended that
in the figure).
button again.
70 cm
in the figure) and
button. To turn off the
button will
Light sensor
Publicité
