Mount the Camera
Installation Tips
• Do not face the camera towards any light sources.
• Do not point the camera towards a glass window. Or, it may result in poor image quality
because of the window glare by infrared LEDs, ambient lights or status lights.
• Do not place the camera in a shaded area and point it towards a well-lit area. Or, it may
RST
result in poor image quality. To ensure best image quality, the lighting condition for both the
camera and the capture object shall be the same.
• To ensure better image quality, it's recommended to clean the lens with a soft cloth from
time to time.
• Make sure the power ports are not directly exposed to water or moisture and not blocked
by dirt or other elements.
• With IP waterproof ratings, the camera can work properly under conditions like rain and
snow. However, it doesn't mean the camera can work underwater.
• Do not install the camera at places where rain and snow can hit the lens directly.
• Try to keep the left lens level with the right lens.
9
RST
LED
LAN
DC
Fix the Floodlight to the Camera
Fix the floodlight to the camera before mounting the camera.
RST
RST
RST
1.Screw the floodlight to the camera.
2.Connect the wire from the floodlight to the wire from the camera. Make sure the side of
the wire from the floodlight with an arrow mark on it faces the LAN port, as shown in the
picture.
3.Tuck the wires into the mounting bracket.
RST
RST
LED
LAN
LED
LAN
DC
DC
RST
10