Connection Diagram
Before initial setup, follow the steps below to connect your camera.
1. Connect the camera to a LAN port on your router with an Ethernet cable.
2. Use the power adapter to power on the camera.
Camera
Router
Network Cable
NOTE: The connection diagram takes the WiFi camera as an example and also apply to
the PoE camera. For PoE Camera, please power the camera with a PoE Switch/Injector/
Reolink PoE NVR, or a DC 12V power adapter.
7
English
Power Adapter
LED
LAN
DC
Power Cable
Set up the Camera
Download and Launch the Reolink App or Client software, and follow the onscreen
instructions to finish initial setup.
• On Smartphone
Scan to download the Reolink App.
NOTE:
• When setting up the WiFi camera, you need to follow the onscreen instructions to finish the
WiFi configuration first.
• If you are connecting the PoE camera to a Reolink PoE NVR, please set up the camera via
the NVR interface.
RST
English
8