Publicité
2) The new indicators are now connected to the
8-pole relay. The left rear indicator must be
connected to terminal 3 of the relay and the
right rear indicator to terminal 7 of the relay.
To do this, you must lay one cable each from
the terminal to the respective flashing light.
At the indicator this cable goes to the red
line. The black wire of the indicator must be
connected to the body with a ring cable lug.
Ensure good ground contact. If necessary,
scrape off some varnish under the cable lug
and seal the area with terminal grease (item
no. 216298).
Now you can reconnect the battery and check
the function of the indicators.
You can also find out how to make the electrical
connections in the enclosed wiring diagram
Publicité
