Télécharger Imprimer la page

Limora 489963 Instructions D'installation page 8

Publicité

Mechanical works
Remove the "cat's eyes" on the rear mask and
fit the new indicator lamps into the free space.
If requested in your country, you may have to fit
a red reflector at the rear of the vehicle on each
side, e.g. on the bumper.
Electrical works
Caustion: Remove ground lead from battery
before every work on the elektric circuit of the
car
1) Remove the lines from terminals 7, 3 and 5 of
the 8-pole cut-off relay (cable colours: white
with brown, white with violet and green with
violet). Then connect these 3 lines to each
other; they must be extended for this pur-
pose. Please make sure that the connection
points are well insulated against other con-
nectors and the body. This turns the brake/
indicator lamps into pure brake lights, as
they are only connected to the brake light
switch (green violet cable). All other wiring
on the cut-off relay remains unchanged.

Publicité

loading