Télécharger Imprimer la page

Citizen C32501 Manuel D'instructions page 5

Publicité

Les langues disponibles

Les langues disponibles

REMOTE CONTROL
1
2
3
4
5
6
7
8
1. POWER Button - Press to turn the TV on. Press again
to turn the TV off.
2. Direct Channel Selection Buttons (0-9) - Allow direct
access to any channel.
3. DISPLAY Button - When you press this button, the
channel number will appear in the upper right corner of
the screen. Press the button again to remove display
from the screen.
Before using the remote control, batteries must first be installed.
HOW TO INSTALL BATTERIES
1. Open the battery compartment cover.
2. Install two "AAA" batteries (not supplied).
3. Replace the battery compartment cover.
All manuals and user guides at all-guides.com
4. SLEEP Button - To set the TV to turn off after a preset
9
5. VOL (VOLUME)
10
6. MENU Button - Press to display the On-Screen menu
7. EXIT Button - Press remove the setup menu.
11
8. TV/AV Button - Switches between TV and external inputs.
9. QUICK VIEW Button - This button allows you to go back
12
10. MUTE Button - To turn off the sound, press this button once.
13
14
15
11. CH (CHANNEL)
12. ENTER Button - Press to enter or select information for
13. RESET Button - Press to reset the On-Screen picture
14. CLOSED CAPTION Button - Press this button to switch
15. AUDIO SELECT Button - Switches sound between mono
Use two "AAA" size batteries. The batteries may last
approximately one year depending on how much the remote
control is used. For best performance, it is recommended
that batteries should be replaced on a yearly basis, or when
the remote operation becomes erratic. Do not mix old and
new batteries or different types.
BATTERY PRECAUTIONS
These precautions should be followed when using batteries
in this device:
• Use only the size and type of batteries specified.
• Be sure to follow the correct polarity when installing the
batteries as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
• Do not mix different types of batteries together (e.g.
Alkaline and Carbon-zinc) or old batteries with fresh ones.
• If the device is not to be used for a long period of time,
remove the batteries to prevent damage or injury from
possible battery leakage.
• Do not try to recharge batteries not intended to be recharged;
they can overheat and rupture (follow battery manufacturer's
directions).
amount of time, press the SLEEP button. The clock will
count down 10 minutes each time the button is pressed in
the order of 120, 110, 100, ······ 20, 10, 0. After the sleep
time is programmed, the display will disappear then reappear
momentarily every ten minutes to remind you the sleep
timer function is operating. To confirm the sleep time setting,
press the SLEEP button once and the remaining time will
be momentarily displayed. To cancel sleep time, press the
SLEEP button repeatedly until the display turns to 0.
/
Buttons - Press the
increase, or the
button to decrease the volume level.
function.
to the previous channel selected by just pressing the
QUICK VIEW button. Press this button again to return to
the channel you were watching.
The TV will be silenced and the symbol "MUTE" will appear
on the screen. The muting feature can be released by
pressing the MUTE button again or one of the VOL
or
button.
/
Buttons - Press the
change to a higher numbered channel set into memory.
Press the
button to change to a lower numbered channel
set into memory.
On-Screen operations.
adjustments to their factory preset positions.
between normal TV and the two Closed Caption modes
(captions and 1/2 of full screen text). Closed Captioning
will display text on screen for hearing impaired viewers.
and stereo when receiving broadcasts in stereo.
button to
button to
5

Publicité

loading