WireLogic WFM-2665A Guide D'installation page 5

All manuals and user guides at all-guides.com
THREAD DEPTH INDICATOR (Not included)
a. Insert a thread depth indicator through the thread inserts found on the back of the flat panel.
Make sure the inserts measure the same full depth. Mark the depth.
b. Locate the correct diameter screw for the thread insert. Match your marked length to the screws.
c. The screw length must not bypass the marking. Select another screw size, until you find one that
comes closest to your mark without going past.
WARNING: IF YOUR SELECTED SCREW IS LONGER THAN THE MARKING ON THE THREAD DEPTH
INDICATOR, DO NOT USE THIS SCREW.
Screw
Thread Depth Indicator
Marking
Inverted Flat
Panel Display
Marking the Depth
Thread Insert
Thread Depth Indicator
Screw
Marking
Thread Depth Indicator
Page | 5