Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
3. For the sake of safety, make sure to specify the installation position and ensure that the wall
can bear the weight of the television and bracket. Measures should be taken to make the
installation strong enough to withstand an earthquake, excess vibration or other external forces.
No pasteboard wall
or thin board
(thickness must be
more than 1.5")
4. Install the mount and display on a flat and stable surface.
Note: Incorrect installation may cause the display to fall and potentially cause personal injuries.
• Installing the bracket on a wall:
During installation, please ensure that the wall stud has enough strength to bear the total
weight of the display and bracket. Do not install the bracket on a decorative post or plaster-
board wall.
• Installing the bracket on a concrete wall:
Use standard fastening pieces that are strong enough to bear the weight of the display.
5. Do not install this mount or display on unsteady surfaces. Failure to do so could lead to per-
sonal injury.
6. Do not install the display in a dusty area in order to reduce the risk of fire.
7. Do not install the mount and display in places where there is excess amounts of direct sunlight
in order to avoid eyestrain from watching TV.
8. Install this display and mount with the specified parts in the specified places. Do not substitute
any of the parts as this can lead to incorrect and unsafe installations.
9. Please follow the TV assembly sheet and the bracket-assembly sheet carefully to avoid damage
to the display and/or possible personal injury.
10. The manufacturer and the dealer do not assume responsibility for incorrect installation when non-
professional personnel attempt to perform the installation.
11. Unplug the display and contact the local dealer if you encounter the following conditions:
a. The installation is loose and the display swings over a larger than specified angle.
b. Any mounting screws/parts are loose or lost.
c. The functioning of the equipment has changed in a dramatic way.
12. If the mount appears unsafe, perform the following measures:
a. Power off the television and disconnect the AC power cord from the wall.
b. Make sure that others are not allowed to come near the mount and display.
c. Contact the local dealer.
d. Ask your dealer to reinstall or move the bracket, or adjust the angle. Incorrect installation or
adjustment may cause the display to fall.
13. Do not install near a source of running water or excess humidity in order to reduce the risk of
electric shock.
14. Ensure the display is well ventilated to protect it from overheating. Plasma displays in particular
can give off significant amounts of heat. Do not block the ventilation slots and openings on the
display.
15. When dismantling this display and mount after lengthy use, screw holds and expansion screws
might remain in the wall due to high temperature and airflow.
Line up stud
to mount
Pasteboard with
pillar or plank
(thickness more
than 2.75")
Page | 3
Publicité
