FRIGOGLASS Smart-300 LC Manuel D'utilisation page 16

ENG
8. RCCB
In accessing the RCCB, please follow the steps below
Step 1: Remove the grid to get access to the electrical box (that is marked in circle in the respective
picture below)
Step 2: Remove the connectors' cover of the electrical box
Step 3: Access the RCCB switch (that is marked in circle in the respective picture below and
indicated also on the sticker on the front of the cover)
Step 1
9. PRCD
The PRCD device is integrated to the power cord of the unit (as shown in picture below), close to the
wall plug.
The PRCD device features two buttons; the small one is the "test" button and is used to check the
operational status of the PRCD. The bigger button is the "reset" and is used to rearm the PRCD after a
triggering event.
When plugging off the power cord a test needs to be perfomred to ensure proper operation of the
PRCD. Please follow the steps below:
*
optional feature
16
Step 1
*
*
Step 2
Step 2, 3
RCCB