Lumbar Support Adjustment; Care And Maintenance; Cleaning; Inspection - Aria BKRTR Manuel D'utilisation

4.1 LUMBAR SUPPORT ADJUSTMENT

1. To access the lumbar support, open the hook and loop fastening strips on the shell.
2. Open the central zipper positioned on the back of the padding.
3. Put the foam lumbar support inside the Aria backrest cover between the foam back cushion and the back
shell.
4. The lumbar support can be adjusted to any desired height/position.
5. Close the zipper on the back of the padding and reposition on the shell, making sure that it covers the edges
to avoid injury to the user.

5. CARE AND MAINTENANCE

5.1 CLEANING

The cover may be easily wiped down with a damp cloth when necessary. IThe covering can be removed for
washing or to access the inside of the back thanks to the zipper on the back of each padding. Remove the
internal fi reproof foam cushion from the lining before washing. Nel caso in cui il rivestimento risulti contaminato,
rivolgersi per un consulto ad un esperto di malattie infettive. In alternativa, contattare Aria Wheels Srls per
ottenere informazioni sul protocollo di decontaminazione.

5.2 INSPECTION

ATTENTION !
Inspect ALL fasteners weekly to ensure that mechanical connections and
attaching hardware are tightened securely.
DO NOT continue to use this product if problems are discovered. Corrective
measures can be performed at, or arranged through your equipment supplier.
Perform a visual inspection of parts including hardware, brackets, upholstery materials, foams, and plastics for
deformation, corrosion, breakage, wear or compression.

6. AFTER USE

6.1 REUSE

ATTENTION !
Danger of injury
Always have a dealer check that the product is not damaged before delivering
the product to another user. If damage has been found DO NOT use the product.
Otherwise, there is a risk of injury.
The back cushion is suitable for re-use.
The following actions must be taken:
• Cleaning and disinfection in accordance with the Cleaning 5.1.
• Inspection in accordance with Inspection Section 5.2.
• The back cushion should be adapted to the new user following the indications of the
section Mounting the backrest 3.3 and Adjusting the lumbar support 4.1
21 ENG