KitchenAid 5KSMICM Manuel D'utilisation page 4

PRODUCT SAFETY (CONTINUED)
22. This appliance is intended to be used in household and similar
applications such as:
- staff kitchen areas in shops, offices and other working
environments;
- farm houses;
- by clients in hotels, motels and other residential type
environments;
- bed and breakfast type environments.
SAVE THESE INSTRUCTIONS
For complete details on product information, instructions and videos, including Guarantee
information, visit www.KitchenAid.co.uk or www.KitchenAid.eu. This may save you the cost
of a service call. To receive a free printed copy of the information online,
PRODUCT ASSEMBLY
ATTACHING THE ICE CREAM MAKER FOR TILT-HEAD STAND
MIXERS
Before first use
Before using your attachment, remove the "Do not immerse in water" label. The Freeze Bowl,
Dasher, and Drive Assembly must be washed by hand.
1.
Turn Stand Mixer off (0) and unplug.
IMPORTANT: Before first use, set freezer to its coldest setting and store the Ice Cream
Bowl in the freezer for a minimum of 16 hours. Do not pour ice cream batter into the
Freeze Bowl until all parts are assembled and the Stand Mixer is running.
2.
Tilt motor head back and remove the mixing bowl.
3.
Place the Dasher inside the Freeze Bowl.
4.
Place the Freeze Bowl on the Bowl-Clamping Plate.
NOTE: Use the Freeze Bowl immediately upon removal from freezer, as it begins to thaw
once removed.
ATTACHING THE DRIVE ASSEMBLY FOR TILT-HEAD STAND
MIXERS
1.
Be sure the Stand Mixer is off (0) and unplugged. Keep the motor head tilted back and put
the Dasher and Freeze Bowl into place.
2.
Place Drive Assembly onto the Stand Mixer, aligning the cutout with the Stand Mixer shaft.
3.
Lower the motor head to engage the Drive Assembly with the Dasher. If the Drive
Assembly doesn't engage the Dasher, slide the Drive Assembly either back or forward
until it does engage the Dasher properly.
4.
Make sure the motor head is down completely.
5.
Place locking lever in the position. Before mixing, test the lock by attempting to raise the
motor head.
4
call 00 800 381 040 26.