Publicité
The unit may only be connected to a 230 V AC/50/60 Hz
protected socket. While the unit is not in use or before cleaning
the unit, unplug from power mains and disconnect the quick
clamps. Never pull on the power cord, always grasp the plug
itself to unplug.
Please do not wear conductive jewellery as necklaces, bracelets
or rings while using the unit.
Before connecting the quick clamps, clean thoroughly.
After extended use with full charging current the unit may heat
up. For this reason periodically check the charging process and
in the case of irregularities (excessive overheating or bubbling,
leakage of battery acid) immediately pull the power plug.
First connect the quick clamps to the battery and then connect
the plug to power mains.
Make sure that battery gases do not come into contact with the
housing of the charger.
Do not disassemble the charger or attempt to repair it yourself.
The unit does not contain parts serviceable by you.
All manuals and user guides at all-guides.com
Safety Notes
8
Publicité
