Télécharger Imprimer la page

Nilfisk-cfm 3308 Manuel D'instructions page 23

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Accessories
Various accessories are available; refer to the manufacturer's
accessory catalogue.
WARNING!
ATEX variant: refer to the manufacturer's sales
network.
WARNING!
Use only genuine accessories supplied and
authorized by the manufacturer.
Packing and unpacking
Dispose of the packing materials in compliance with the laws
in force.
Figure 3
Model
A (mm)
3308
1,300
3308 L, M, H
1,300
3508
1,300
3508 L, M, H
1,300
3508 W
1,300
3508 WL
1,300
3558
1,300
3558 L , M, H
1,300
09/2014
All manuals and user guides at all-guides.com
B (mm)
C (mm)
Kg
700
1,730
172
700
1,730
182
700
1,730
197
700
1,730
207
700
1,730
197
700
1,730
207
700
1,730
211
700
1,730
217
Setting to work - connection to the power
supply
WARNING!
Make sure that the vacuum cleaner is in perfect
condition before commencing work.
Before plugging the vacuum cleaner into the
electrical mains, make sure that the voltage rating
indicated on the data plate corresponds to that of
the electrical mains.
Plug the vacuum cleaner into a socket with a
correctly installed ground contact/connection.
Make sure that the vacuum cleaner is off.
The plugs and connectors of the connection
cables must be protected against splashed water.
Make sure that connections to the electrical
mains and plug are correct.
Use the vacuum cleaners only when the cables
that connect to the electrical mains are in perfect
condition (damaged cables could lead to electric
shocks!).
Regularly check that the electric cable does not
show signs of damage excessive wear, cracks or
ageing.
WARNING!
When the vacuum cleaner is operating, do not:
Crush, pull, damage or tread on the cable that
connects to the electrical mains.
Only disconnect the cable from the electrical
mains by removing the plug (do not pull the
cable).
Only replace the electric power cable with one
of the same type as the original: HO7 RN - F. The
same rule applies if an extension is used.
The cable must be replaced by the manufacturer's
Service Centre staff or by equivalent qualified
personnel.
5
3308 / 3508 / 3558
GB
C67

Publicité

loading

Produits Connexes pour Nilfisk-cfm 3308