Publicité
Les langues disponibles
Les langues disponibles
Programmed playback (for CD mode or USB mode)
Up to 32 tracks can be programmed to play in any desired order.
1 Press CD
or USB
if the unit is in TUNER or TAPE mode.
You can press CD or USB on the remote control unit
to enter each mode.
2 Press STOP/ENTER to enter stop mode.
3 Press PROGRAM/PRESET.
PROGRAM
P 01
T
Track to be programed
4 Press the number buttons on the remote control
unit to select a desired track to be programmed.
Example:
• To select track 8, press 8.
• When the total number of tracks is double-digits:
To select track 21, press 0 , 2 , then 1.
• When the total number of tracks is triple-digits:
To select track 21, press 0 , 0 , 2 , then 1.
To select track 115, press 0 , 1 , 1 , then 5.
5 Press PROGRAM/PRESET.
6 Repeat steps 4 and 5 to program other tracks.
7 Press CD
or USB
The tracks are played in the order you have
programmed.
You can press CD on the remote control unit to start
programmed playback.
"PROG" is displayed.
14
2
1, 7
to enter each mode,
To repeat programmed playback
Press REPEAT on the remote control unit after starting
programmed playback.
To erase the entire program in the memory
Press STOP/ENTER (or STOP/ENTER on the remote
control unit) in stop mode when "PROG" is displayed.
The program is cleared, and the PROG indicator goes
off.
The program is also cleared when you open the disc door,
turn off the unit or change to other audio sources.
Note:
You cannot program more than 32 tracks.
"FULL MEMORY" is displayed when you program the
32nd track.
.
4
1, 7
2
3, 5
STANDBY /
MENU/
ON
/
TAPE
FM MODE
TUNER/
CD
USB
BAND
STOP/
ENTER
PROGRAM
/
RANDOM
REPEAT
PRESET
MUTING
SLEEP
EQ
1
2
3
4
5
6
7
8
VOL
9
0
REMOTE CONTROL UNIT
Publicité
