Winix 2020EU Manuel D'utilisation page 15

All manuals and user guides at all-guides.com
FILTER CARE
4. Replacing Filters
True
HEPA
filter
AOC
Carbon filter
① Insert the True HEPA Filter first, then the AOC
② Insert the Pre-filter.
•Insert bottom tabs of the Pre-filter into the slots on either side of the lower
part of the unit, then rotate upward to insert the upper tabs into the slots at
the top part of the unit until sides audibly click into place.
Replace the front panel by first inserting the latch at the bottom
③
edge into the base of the unit, then rotate the panel upward toward
the top of the unit until the magnets pull the lid closed.
5. Resetting The Unit
① After replacing the filters, turn the
power back on and then use a
thin object, such as a paper clip,
to press the RESET switch for 5
seconds.
English
▶
TM
Pre-filter
Tabs
Latch
▶
TM
Carbon filter.
2020EU
15