Wetekom 82 55 04 Mode D'emploi page 18

All manuals and user guides at all-guides.com
Press the HOLD key again to return to the current tem-
perature measurement.
5. Press the ON/OFF key to switch off the digital piercing
thermometer. When you do not operate the thermome-
ter for more than 20 minutes, it automatically switches
off.
6. After measuring, clean the temperature probe and put
the protection cap (8) on the thermometer.
Notes:
If the measured temperature is higher than +250°C, the
display will show the overrange indicator "H --".
If the measured temperature is lower than -40°C, the
display will show the overrange indicator "L --".
Explanation of Symbols
MAX Maximum temperature reading is displayed
MIN Minimum temperature reading is displayed
HOLD The temperature reading is held on the display
Negative Symbol
°C Temperature in the unit Celsius
°F Temperature in the unit Fahrenheit
Using
11