Uline H-6922 Instructions D'assemblage page 2

Figure 4
PAGE 2 OF 9
ASSEMBLY CONTINUED
2. Secure legs to undershelf with set screws using 5/32"
Figure 2
3. Stand table upright and place tabletop onto legs,
Set Screw
Gusset
Figure 3
4. Level table with the adjustable feet. Adjustable feet
Allen wrench. (See Figure 2)
NOTE: Undershelf must be level. Use care not to
overtighten screws or failure will occur.
inserting legs into tabletop gussets. With a 5/32"
Allen wrench, tighten set screw on each gusset.
(See Figure 3)
allow approximately 1" of adjustment. (See Figure 4)
0721 IH-6922