Publicité
Liens rapides
FEDERAL COMMUNICATIONS COMMISSION (F.C.C.) STATEMENT
This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
•
Relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Use only shielded cables or connect I/O devices to this equipment.
You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
This device complies with requirement of EMC directive 89/336/EEC with regard to Electromagnetic
Compatibility, and 73/23/EEC and 93/68/EEC with regard to Low Voltage directive.
All manuals and user guides at all-guides.com
1
Publicité
Sommaire des Matières pour CTX MS500
- Page 1 All manuals and user guides at all-guides.com FEDERAL COMMUNICATIONS COMMISSION (F.C.C.) STATEMENT This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 2 All manuals and user guides at all-guides.com IMPORTANT SAFETY INSTRUCTIONS 1. Do not use your monitor against a bright background or where the sun directly shines on it. Niemals den Monitor gegen einen hellen Hintergrund oder bei direkter Sonnenbestrahlung benutzen, N’utilisez pas votre moniteur sur un fond trop clair.N’installez pas votre moniteurdonc le soleil va l’éclairer directement.
- Page 3 All manuals and user guides at all-guides.com 6. Avoid liquid spill on the monitor, and do not expose the monitor damp, dusty or dirty ambience. Niemals Flüssigkeiten in das Innere des Monitors dringen lassen. Den Monitor niemals übermässigem Staub oder Schmutz aussetzen. Ne laissez jamais des liquides renverser sur le moniteur.
- Page 4 All manuals and user guides at all-guides.com A: Nordamerika: Mit UL und CSA gelistetes Netzkabel verwenden. B: Deutschland: Netzkabel mit VDE-Zeichen verwenden. C: Nordeuropa: Netzkabel mit SEMKO, NEMKO, DEMKO oder FIMKO wählen. D: Andere Gebiete: Netzkabel wählen, daß für Steckdose sowie Stromsystem geeignet ist. Normalerweise wird ein passendes Netzkabel vom Hersteller mitgeliefert.
- Page 5 All manuals and user guides at all-guides.com INSTALLING AND REMOVING THE TILT SWIVEL BASE Turn off the system and unplug all cables when installing or removing the tilt swivel base, then carefully set the monitor upside down. System ausschalten und alle Verbindungskabel entfernen, wenn Sie den Schwenkfuß installieren oder entfernen wollen.
- Page 6 All manuals and user guides at all-guides.com CONNECTING THE MONITOR 1. Power off the computer. 2. Connect the monitor's signal cable to the graphic card. 3. Plug in the monitors power cord. 4. Power on the computer, and the monitor 5.
- Page 7 All manuals and user guides at all-guides.com PRESET MODES Display Format Abbildungsformat 1)VESA 2)VESA 3)VESA 4)VESA Format d'affichage Horizontal Dots Horizontal Pixel 1024 1280 Point d'images horizontaux Vertical Lines Vertikal Pixel 1024 Lignes verticales Horizontal Frequency Horizontalfrequenz 31.5KHz 43KHz 63.7KHz 53KHz 62.5KHz 69KHz 64KHz Fr éq u ence de ligne Vertical Frequency...
- Page 8 All manuals and user guides at all-guides.com USER’S CONTROLS (1) POWER INDICATOR Dual color LED for indication of different power draw status. Green LED is lit in normal operation, while amber LED color indicates power-saving mode. (2) POWER SWITCH (3) CONTROL KEYS •To adjust the parameters of the selected function.
- Page 9 All manuals and user guides at all-guides.com (7) MUTE Um die Lautstärke des Lautsprechers sofort zu unterbrechen. Betätigen Sie den MUTE-Knopf erneut, um diese Funktion auszuschalten. Die Klangfunktion wird nicht unterbrochen, auch wenn der Videoschirm noch immer ausgeschaltet ist, was als Sound-On-Charakteristik beschriebaen wird.
- Page 10 All manuals and user guides at all-guides.com HOW TO USE ON-SCREEN ADJUSTMENT (1) Press "MENU" key to open the On-Screen menu function. Six adjustment functions will appear on the On-Screen menu. Press "MENU" key to scroll selections from top-down sequence. Press "+", "–", "...
- Page 11 All manuals and user guides at all-guides.com C.SIZE / GRÖSSE / AMPLEUR: E. COLOR / FARBE / COULEUR: 1. By pressing the " " key, you can select mode 1, 1. press the " + " key to enlarge horizontal width and 2 or 3.
- Page 12 All manuals and user guides at all-guides.com (2) Contrast/Brightness / Kontrolltasten/Helliokeitssteuerung / Contraste/luminosite When OSD is off, a. Press the " " or " " key to set the prefered brightness. b. Press " + " or " - " key to increse or decrease the contrast level on the screen. Wenn das OSD ausgeschaltet ist, a.
- Page 13 All manuals and user guides at all-guides.com USER’S SPECIFICATIONS Picture Tube: 38.1cm/15 inches(Viewable 35.1cm/13.8"), 0.28mm Dot Pitch, (Low Radiation / Anti-Static/Anti-Magnetic) Scan Freq.: 30 ~ 70KHz, Horizontal, 50 ~ 120Hz, Vertical Resolution: 1280x1024(60Hz), maximum Power Supply: AC 100V to 120V,200V to 240V, 50/60Hz (Automatic) Power Consumption: 100W (<8W in power-saving mode) Plug &...
- Page 14 All manuals and user guides at all-guides.com USER’S HANDY TROUBLE-SHOOTING GUIDE What you see What to do No picture Check monitor power switch, power cable Maximize brightness, contrast. Signal frequency out of range. "No Singal Input" is displayed Check signal cable Is the PC on? Is the video card working ? Wavy Picture Remove nearby hi-frequency electronic devices, TV/radio, trans-...
- Page 15 All manuals and user guides at all-guides.com MANUFACTURER’S LIMITED WARRANTY The Manufacturer guarantees the Purchaser of this product with one-year free parts & labor warranty in the unlikely event of product defect caused by material or workmanship. The product should be returned with original packaging, proof of purchase and/or RMA Number. Furthermore, it is understood and agreed that the returned product is freightage-prepaid and fully-insured for one-way transit by Purchaser within valid warranty period.
- Page 16 All manuals and user guides at all-guides.com Operating Instructions MS500 38.1cm/15" (viewable 35.1cm/13.8"), 0.28mm dot pitch, 30-70KHz, VESA 1280*1024 Flicker-free,with IBM VGA auto-sizing, micro- processor, On-Screen Display, universal power supply, MPR II, ENERGY STAR power-saving feature, Plug & Play, for IBM PC, PS/2,...