Arrifana 08C
OPERATING FROM THE CONTROL PANEL
The control panel enables you to manage all the main functions of the appliance, but to fully
exploit its potential, you must use the remote control unit.
TURNING THE APPLIANCE ON
Plug into the mains socket.
Two lines appear on the display indicating that the appliance is in standby.
Press the
button until the appliance comes on. The last function active when it was
turned off will appear.
Never turn the air conditioner off by unplugging from the mains. Always press the
button
, then wait for a few minutes before unplugging. This allows the appliance to
perform a cycle of checks to verify operation.
COOL MODE
Ideal for hot muggy weather when you need to air conditioning and dehumidify the room.
To set this mode correctly:
Press the " " button a number of times until the " " symbol appears.
Select the target temperature by pressing the " " or " " button until the corresponding
value is displayed.
Select the required fan speed by pressing the " " button.
www.blaupunkt.com
13