Publicité
Les langues disponibles
Les langues disponibles
Insert Power Cable
Insert the power cable (a) and turn the
printer ON (b).
WARNING!
Be sure to use the 10A AC power cord
supplied with the printer. Use of a power
cord NOT supplied with this printer, or an
extension cord, may result in overheating,
and could be a safety hazard.
CAUTION!
To prevent fire or shock hazards, connect
the power plug only to a properly rated
power outlet.
CAUTION!
Do not connect this product to an
uninterruptible power supply (UPS).
Computer Connection -
PC
Note: Interface cables are not supplied.
Install Network Cable
Connect the network cable between the
printer network port and the Ethernet hub
or router.
USB Connection
Note: If installing for Windows
install the software BEFORE
installing the USB cable. See
"Installing the Driver on a USB or
Parallel Setup" on page 8.
Connect the USB cable between the printer
USB port and the computer.
Parallel Connection
Note: Requires UL approved bi-directional
(IEEE 1284 compliant) cable.
Connect the Parallel cable between the
printer's Parallel port and the computer.
English 6
©
,
Publicité
