Orbegozo FH 5525 Manuel D'instructions page 12

FH 5525
 Allow ample space around the heater. A safe area to be
left free is 100 cm at the front and at the sides and 100
cm at the top.
 Always unplugged the heater after use.
 Important! Do not insert any foreign objects into the
appliance openings! Risk of injury (electric shock) and
damage to the appliance!
 Keep the mains cord at a safe distance from the air inlet
and outlet grilles.
These instructions for use belong to the appliance and
must be kept in a safe place, when changing owners,
these instructions must be surrendered to the new
owner.
GENERAL DESCRIPTION
1. Thermostat knob
2. Heat select switch knob
3. Heat select switch knob
4. Air outlet
5. Air inlet
INSTRUCTIONS FOR USE
1. Turn the thermostat switch to the minimal value, at the same time turn the heat select switch to the "O"
position (see picture).
2. Plug in the appliance, and turn the thermostat switch to the maximum position. Then turn the heat select
switch to choose air or warm air and the temperature of warm air as below. While working the indicator
light will be on.
2.1 Turn the heat select switch to "
2.2 Turn the heat select switch to "I" position, the heater blows warm air, working at 1000W.
2.3 Turn the heat select switch to "II" position, the heater blows warm air, working at 2000W.
2.4 Turn the heat select switch to "O" position, the heater stops working, the indicator light will be off.
3 Adjust the thermostat switch to suitable position for desired temperature setting.
3.1 Check if the thermostat switch is on the maximum position.
3.2 When you feel the room temperature comfortable, turn the thermostat switch anti-clockwise slowly to
the minimal position until the appliance stops working.
3.3 Then the thermostat switch will keep the room temperature at the desired temperature automatically.
" position, the heater blows cool air.
12