Probuilder 26201 Manuel D'instructions page 26

There are two safety-related switches on the
tool: main switch (trigger) and safety contact
(� gure 1).
Follow instructions for safe use:
1. Connect the tool to mains.
2. Switch on at mains.
3. Place the tool where a staple/tack is to be
inserted.
4. Press the tool against the item.
5. Press the trigger.
Figure 1
Loading and removal of jammed staples/
tacks
1. Disconnect the power to the tool, turn it
so that the 'tack outlet' is facing upwards,
press the open/lock switch and pull the
magazine all the way back.
2. Place tacks all the way to the right/left in
the tool. Staples can just be placed in it.
Push the magazine forward until it locks
into place, turn the tool and reconnect
the power.
3. Follow instructions 1 & 2 for jammed
staples/tacks.
26
Trigger
Open/lock
switch
Type 53
(0,75 x 11,4 mm) (0,75 x 11,4 mm)
1,2 mm)
Type 47 Type 47
(0,9 x 1,25 mm) (0,9 x 1,25 mm)
Cleaning
Wipe with a dry cloth. Do not use liquids.
Accessories
Suitable for staples and tacks from 8-16 mm.
Service centre
Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
• Complaints
• Replacements parts
• Returns
• Guarantee issues
• www.schou.com