Publicité
Les langues disponibles
Les langues disponibles
TV OPERATION
MUTE
Press MUTE button to switch off
the sound. The TV/VCR's sound
will be silenced and "MUTE" will
briefly appear on the screen. The
sound can be switched back on by
pressing this button again or one
of the VOL + or – button.
CHANNEL M M M M M /? ? ? ? ?
Press and release the CH (CHAN-
NEL) M M M M M or ? ? ? ? ? button. The channel
automatically stops at the next
channel set into memory. For
proper operation, before selecting
channels, they should be set into
the memory. See pages 15 and 16
"To memorize channels".
CALL
Press the CALL button. The clock, date, channel number,
real time tape counter, tape speed and VCR operation will
be indicated.
Press the CALL button again to disappear the call display.
Current time
8 : 47AM THU
Channel No.
CH 012
Auto Repeat
Tape In
00 : 04 : 38 SP
Tape Speed
Real Time Counter
NOTE: To listen through the headphones, insert a
headphones (not supplied) with a 3.5 mm mini
plug into PHONES jack on the front. The sound
from the TV speaker is muted.
SLEEP
To set the TV/VCR to turn off after a preset amount of
time, press the SLEEP button on the remote control.
The clock will count down 10 minutes for each press of
the SLEEP button (120, 110, ...10, 0). After the sleep time
is programmed, the display will appear briefly every ten
minutes to remind you that the sleep timer is operating.
To confirm the sleep timer setting,
press the SLEEP button and the
remaining time will be momentarily
displayed. To cancel the sleep timer,
press the SLEEP button repeatedly
until the display turns to 0.
14
All manuals and user guides at all-guides.com
QUICK VIEW
This button allows you to go back
MUTE
to the last channel selected by
pressing the QUICK VIEW button.
Press this button again to return to
the last channel you were watch-
ing.
TV/CAPTION/TEXT
WHAT IS CLOSED CAPTIONING?
CH 012
This television has the capability to decode and display
Closed Captioned television programs. Closed
Captioning will display text on the screen for hearing
impaired viewers or it will translate and display text in
another language.
Press the TV/CAP/TEXT button to switch between
normal TV and the two closed
caption modes (captions and full
screen text). Closed captioning will
display text on the screen for
hearing impaired viewers.
VCR operation
NOTES:
: Play
: Rewind
: Fast-forward
: Eject
: Recording
: Pause
: Stop
: Zero return
(Rewind)
: Zero return
(Fast-Forward)
CLOSED CAPTIONING WITH A VCR
Closed Captioned programs can be recorded and played
back on a VCR with the Closed Captioned text intact.
The Closed Captioned text will disappear during Cue
(Fast Forward Search), Review (Rewind Search) and
Pause Modes or if the VCR tracking is not adjusted
properly.
TO VIEW CLOSED CAPTIONS
SLEEP
Press the TV/CAP/TEXT button on the remote control to
120
switch between normal TV and the two Closed Caption
Modes (Captions and Full Screen Text).
•
If using an indoor antenna or if TV reception
is very poor, the Closed Caption Decoder text
may not appear. In this case, adjust the
antenna for better reception or use an outdoor
antenna.
•
When activating the Closed Captioned
Decoder, there will be a short delay before
the Closed Captioned text appears on the
screen.
•
Closed Captioned TV programs can be
recorded and played back on a VCR with the
Closed Captioned text intact. The Closed
Captioning text will disappear during Cue,
Rewind and Pause modes or if the VCR
tracking is not adjusted properly.
•
Closed Captioned text is only displayed in
locations where it is available.
•
If the Call display is on, the Closed Captioning
text will not appear.
CH 012
CAPTION CH 1
Publicité
