Publicité
Les langues disponibles
Les langues disponibles
MANUAL CLOCK SETTING
You must set the date and time for Timer Recordings
and ON/OFF Timer.
EXAMPLE: Setting the clock to "8:30 AM", 30th (SAT)
October, 2004.
1
Press the MENU button.
Press the B or A button to select
the
option.
Press the L or M button to
2
select the CLOCK SET option,
then press the A button.
3
Press the B or A button to set the
month, then press the M button.
4
Set the day, year and time as in
step 3.
After setting the clock, date and time
starts functioning automatically.
•
NOTES:
After a power failure or disconnection of the
power plug, the time display will be lost. In
this case, set the present time again.
To move cursor backward, press the L button.
•
All manuals and user guides at all-guides.com
TV OPERATION
1
To turn on the TV/VCR, press the POWER button.
2
Adjust the volume level by
pressing the VOL + or –
button. The volume level will be
indicated on the screen by
green bars. As the volume level
CH CH
increases, so do the number of
CLOCK SET
ON/OFF TIMER
bars. If the volume decreases, the number of green
AUTO CLOCK
ON
STANDARD TIME
bars also decreases.
DAYLIGHT
SAVING TIME
3
Set the TV/CABLE menu option to the appropriate
/
/
/
/ MENU
position (see page 15).
CH CH
4
Press the Direct Channel selection buttons to select
CLOCK SET
ON/OFF TIMER
the channel.
AUTO CLOCK
ON
STANDARD TIME
• TV mode direct channel selection
DAYLIGHT
SAVING TIME
/
/
/ MENU
CH CH
CLOCK SET
MONTH
10
DAY
1(MON)
YEAR
2004
TIME
12:00AM
• CABLE TV mode direct channel selection
/
/
/
/
ENTER/MENU
CH CH
• TO SELECT CABLE TV CHANNELS:
CLOCK SET
MONTH
10
DAY
30(SAT)
YEAR
2004
TIME
8:30AM
/
/
/
/
ENTER/MENU
8:30 AM SAT
NOTES:
When the TV/CABLE menu option is in the TV
position, all channels can be instantly selected by
using two buttons (for example, to select channel 2,
press "0", then "2". If you press only "2", channel
selection will be delayed for a few seconds). For
channels 10 and above, press the 2 digits in order.
When the TV/CABLE menu option is in the CABLE
TV position, channels can be selected as follows:
1-9
Press "0" twice, then 1-9 as needed.
Example, to select channel 2, press "002".
10-12
Press "0", then the remaining 2 digits.
Example, to select channel 12, press "012".
13-99
Press the 2 digits in order.
Example, to select channel 36, press "36".
100-125 Press the 3 digits in order.
Example, to select channel 120, press "120".
NOTE FOR CHANNELS 1-12:
If only 1 or 2 buttons are
pressed, the corresponding
channel will be selected in 2
seconds.
•
If a channel with no broadcast is selected,
the sound will automatically be muted.
•
If a station being viewed stops broadcasting,
the TV will automatically shut itself off after
15 minutes.
VOLUME
32
CH 012
13
Publicité
