Kyocera TJEP 50/30-4 Instructions De Sécurité Et D'utilisation page 9

Technical specifications
Technical info.
Tank size
Power
RPM
Rating Amps
Working pressure
Motor type
Oil free/Oil lube
Quick coupler
Pressure switch
Drain valve
Duty cycle
L
PA
L
WA
As we are constantly developing and improving our products, the information in this overview is subject to change without notice.
Updated information can be found at www.tjep.eu
Tool application
•
Pneumatic nailers and staplers
Declaration of conformity
We;
Suzhou Alton Electrical & Mechanical Industry Co., Ltd, N.Linhu Road, E.Laixiu Road, Foho Hi-tech Development Zone, Suzhou 215211,
Jiangsu,China
declare under our sole responsibility that the;
TJEP 50/30-4 compressor
conforms with the directive(s), its amedment(s) and standard(s);
2014/30/EU, 2006/42/EC, 2011/65/EU+(EU)2015/863.
EN 1012-1:2010, EN 60204-1:2018, EN 55014-1:2017, EN 55014-2:2015, EN 61000-3-2:2014, EN 61000-3-3:2013/A1:2019
Notified Body: CEM International Ltd Westmead House, Westmead Farnborough, Hampshire, GU14 7LP UK(1942)
Authorized contact in EU to compile the Technical File;
KYOCERA UNIMERCO Fastening A/S, Drejervej 2, DK-7451 Sunds, Tel: +45 97 14 14 40, Mr. Ebbe Hornstrup
Serial number can be found on the front page.
Document ref. No. ZD202010 · Date: 10/08/2020
David Lu
Director, Suzhou Alton Electrical & Mechanical Industry Co., Ltd, Jiangsu,China
TJEP 50/30-4
50 L
230V 50Hz 2 × 1.5 HP / 2400W
1400
11
8.0 - 10.0 bar
Induction
Oil-free
2
10 bar
Ball valve
50%
68.80 dBA
82.80 dBA
English
9