Kaysun KID-02 S Manuel De L'utilisateur page 11

All manuals and user guides at all-guides.com
User manual KID-02 S
6. Cooling /Heating/Fan operation
Ensure the unit is plugged in and power is
available.
1. Press the MODE button to select COOL,
HEAT (cooling & heating models only) or
FAN mode.
2. Press the UP/DOWN buttons to set the
desired temperature. The temperature can
be set within a range of 17ºC~ 30ºC in1ºC
increments.
3. Press the FAN button to select the fan
speed in four steps- Auto, Low, Med, or
High.
4. Press the ON/OFF button to start the air
conditioner.
NOTE:
In the FAN mode, the setting temperature
is not displayed in the remote controller
and you are not able to control the room
temperature either. In this case, only step
1, 3 and 4 may be performed.
9