Publicité
Les langues disponibles
Les langues disponibles
6. Humidity:
6.1: When the humidity is not set, press the humidity button
time and the Set Humidity icon
Humidity character will display _--_%.
Press the humidity button again, the humidity character will display 40%.
And then each time you press the humidity button, the character will
increase by 5% RH until to 80%. Press the humidity button again to cancel
setting the humidity. Press the button again to repeat the above actions.
6.2: When the humidity is set
The Set Humidity icon lights up. The humidity character shows the originally
set humidity value. Each time you press the humidity button, the character
will increase by 5% RH until to 80%. Press the humidity button again to
cancel setting the humidity. Press the button again to repeat the above
actions.
√ When the displayed value is lower than the set humidity value of 5% RH,
the humidification is restarted and the fan works.
√ When the displayed value is higher than the set humidity value, the
humidification is stopped and the fan stops.
7. Water shortage: Under working conditions, all external components stop
working, the water shortage indicator lights up and goes out after about ten
seconds, the machine goes into standby mode.
8. Remote control function: This machine has infrared remote control
function and its switch, mist adjustment, timing setting, sleep setting and
humidity setting can be controlled through the remote control.
08
for the first
lights up.
Safety caution
Operations and Maintenance
01. Only qualified technician can repair or transform this appliance. Any
modification or refitting to this unit without definite permission of our factory
may cause inconvenience and hazard to the user.
02. If the supply cord is damaged, it must be replaced by the qualified
technician in order to avoid a hazard.
03. If the unit has abnormal sound or odor in operation, please shut it down
immediately and disconnect the power plug. Any repair must be done by a
professional repairman.
04. When the unit is not to be used for a long time, please cut off the power
and unplug the plug (this unit does not have to be grounded).
05. Please hold the humidifier by two hands when you add the water to
avoid harm from dropping the water tank.
06. When the unit is operating, do not touch the water in the water bath or
any part in the water with any part of your body.
07. Do not operate the unit with an empty water bath.
08. Before cleaning or moving the unit, please shut it down or disconnect the
plug.
09. Do not let water flow or splash into the base to avoid damaging the
internal parts.
10. Do not add hot water of above 104 °F to the water tank and water bath
to avoid discoloration or distortion.
11. Do not turn on the plug with a wet hand; otherwise there might be the
risk of electric shock.
12. Appropriate working environment: Temperature: 41 °F ~ 104 °F,
RH<80%RH.
13. Do not place metals, chemicals and detergents into the water bath;
otherwise there might be poor atomization.
14. Never pour out the water remaining in the water bath without the power
turned off, otherwise the transducer will be burned out immediately.
09
Publicité
