Publicité
Les langues disponibles
Les langues disponibles
3. Do not put the unit near curtain.
Application Method
Take off the water tank
Fill in with water
06
4. Place the unit away from any
heat source, such as a furnace,
avoid direct sunlight.
Open the valve
Install the water tank and add
aroma oil
Function usage:
1. Connect to the power supply, you will hear the "drip sound", and then it
will enter the standby slate (the power supply backlight "
up). If there is a water shortage, it will not prompt.
2. Push ON/OFF key
, the product enters the working state (the default
is high-range), the night light is on, the fog light indicator bar
fog amount icon light gradually lights up, in the working state, touch the fog
amount function key
, select the fog amount, 3 gears available.
Low-mid-high, when choosing different gears, the fog light indicator bar will
change. The ambient temperature and humidity
middle.
3. Timing: Press the setting button
icon
lights up, the display environment temperature column
will alternately display the currently set time value and ambient temperature,
and the timing time increment is 1-12 hours. The timing is displayed in the
countdown mode with a maximum timing of 12 hours. When the timing time
is displayed 12, press the button again to cancel the timing and the timing
icon goes out. Press the timer button for two seconds to tum off the screen
(the screen is fully off).
4. Heat: On working mode, touch Heat button and PTC begins working with
indicator light
on. Long touch the Heat button for 2 seconds to turn
off/on the LED night light.
5. Sleep: Press the sleep button
machine enters the sleep state, except for the power indicator and the sleep
indicator, all the lights are off and the fog is low. (The light is weakened and
there is a slight light). Press the sleep button again to exit the sleep state
and the machine will work normally.
" will not light
the blue
are displayed in the
to select the timing time, the timing
, the sleep icon lights up, the
07
Publicité
