Wilson Electronics weBoost DRIVE X RV Manuel De L'utilisateur page 12

All manuals and user guides at all-guides.com
______
Using The Optional Cable
Entry Accessories
Skip if you used Option A or B in STEP 1. Pull the RG-6 cable
through the rubber gasket, then place the Cable Entry Cover
into the entry hole (as shown below) and fasten cover to side of
RV. Use the cable mounts and ties to secure to the RV.
Cable Entry
Cover
10
NOTE: We recommend putting a loop
going up to the cable entry hole to
prevent moisture from entering the RV.
We strongly recommend using an RTV
cable
sealant from the inside to prevent
mounts
moisture, insects, and other undesired
things from entering the RV.
CELL PHONE SIGNAL BOOSTER DRIVE X RV
gasket