Heath Zenith SL-7366-02 Mode D'emploi page 4

Determine Chime Type
5. Locate your chime and remove the
cover. If you see tone bars and plungers
you have a mechanical chime (see
Figure 4). If not, you have an electronic
chime.
6. If you have a mechanical chime, go to
the Troubleshooting section, page 7. If
you have an electronic chime proceed
to step 7 on page 5.
CAUTION: Do NOT connect push
button to mechanical chime if push
button jumper is set for electronic
chime use. Doing so may result in
permanent damage to your chime.
Plunger
Figure 4 - Inside Typical Mechanical Chime

Tone Bar
598-18-0