Zyxel DMA-1000W Guide Rapide page 13

6 Make sure you configure this screen with the same settings as on the AP or wireless-
enabled computers.
3.2 Wireless LAN Setup Using Windows® Connect Now
Windows® Connect Now is included with Windows XP Service Pack 2 (SP2). Follow these
steps to use Windows® Connect Now to save your computer's wireless settings to a USB
memory stick which you connect to the DMA-1000W to configure the DMA-1000W's
wireless settings. You do not need to connect the USB stick to the computer yet, you will
be prompted to do so later.
1 Click Start > Control Panel and double-click Wireless
Network Setup Wizard.
2 The first wizard screen displays. Click Next in each screen
to continue.
3 Select Set up a new wireless network to configure a new
wireless network.
ENGLISH
13