HIGHONE CH 60 W 302C Consignes D'utilisation page 22

B
• Remove the grease filter.
• Loosen the 2pcs ST4*8mm screws from the lighting panel,
then take out the lighting fixture.
• Disassembly the 3pcs ST3*12mm screws on the terminal
box cover and take down the wire cover.
• Pull out the terminal from the PCB terminal block,
disconnect the wire connector and replace the lamp.
• ILCOS D code for this lamp is: DBS-2/65-H-120/33
– LED modules –rectangle lamp
– Max wattage: 1×2 W
– Voltage range: AC 110-240V
– Dimensions:
Useful information
15 EN