Publicité
Les langues disponibles
Les langues disponibles
B
cleaning. Use a dry soft cloth to remove any excess moisture
left after cleaning.
IMPORTANT
Using neutral detergents and avoid using harsh cleaning
chemicals, strong household detergents or products
containing abrasives,as this will affect the appearance of
the appliance and potentially remove any printing of artwork
on the control panel and will void manufactures warrantee.
Grease mesh filters
The mesh filters can be cleaned by hand. Soak them for about
3 minute in water with a mild detergent and then brush it
gently with a soft brush. Do not apply too much pressure so
as to avoid any damage to it . (Leave to dry naturally out of
direct sunlight.)
Filters should be washed separately to crockery and kitchen
utensils. It is advisable not to use rinse aid.
Removing grease mesh filters
1. Push the grease mesh filter buckles forward and remove
the front of the filters.
2. Then push the left or right lower side stops of the filter
up until the hanging point at one side stop is not hanging
the hood cavity.
3. Finally,take the whole mesh filters away.
Useful information
12
EN
Publicité
