HIGHONE CH 60 W 302C Consignes D'utilisation page 12

A
Using the appliance
the hood, and then fix the screws to tighten the hood onto the wall. See pic below.
8. Put the expansion pipe on the outlet, then lead it outdoors, or use the outlet cover to seal
the outer outlet and open the inner exhaust valve. Note: the expansion pipe is not included
in the product.
Method B:
1. Drill 4 holes of Ø 6mm at the bottom of the hanging cupboard. See pic below.
2. Install the cooker hood on the bottom of the cupboard, tighten the cooker hood with the
included M4 screws + flat washers.
5 EN