XPower X-600 Notice D'utilisation page 4

XPOWER Air Movers are shipped ready-to-use. Prior to
plugging the unit into the power source, inspect completely
for any shipping damage.
Plug the electrical cord into a standard grounded outlet.
Carefully place the Air Mover unit on a stable, flat dry surface.
The unit is capable to be used at 4 different angles to direct
air flow, except that the unit with handle is at 3 different
angles.
Turn the switch to desired speed, while making sure unit
operates normally.
To reduce the risk of injury, close supervision is necessary
when the unit is used near children. Do not allow children to
play with the unit.
Units without "H" can
be stacked (up to 4)
on their sides.
Units with "H" can be
stacked (up to 3) on
their sides.