XPower X-600 Notice D'utilisation page 10

Daisy Chain Specifications (For model X-600A/P-600A )
XPOWER Air Mover Model X-600A/P-600A are daisy chainable with a low 3.8 amp draw.
The 12-amp on-board circuit breaker will allow two (2) additional same units to
run on one circuit at the same time.
Note:
Air Mover has an on-board circuit breaker. If the auxiliary
outlet overloads, the circuit breaker will trip. If the breaker
trips, unplug the units and press the circuit breaker reset
bu�on.
Plug the units back into the power source and turn on the
switch.